Publish Time: 2021-12-09 Origin: Site
The Hairline finish stainless steel honeycomb panel, is made of a hairline stainless steel top sheet and a 2B mill finish stainless steel bottom sheet, laminated to an aluminium honeycomb core. Hairline finish is also known as brushed finish.
Width of brushed stainless steel honeycomb panel: 1000mm, 1200mm or as required
Length of hairline stainless steel honeycomb panel: 2440mm or as required
Thickness of stainless steel honeycomb core panel: 10mm, 20mm, 25mm or as required
Finishes: No. 4 Hairline stainless steel, or long hairline brushed stainless steel
Colors: original stainless steel. PVD coating (electroplated colors) such as champagne, gold color stainless steel honeycomb panel.
Core: aluminium honeycomb core
Grade of stainless steek skin sheets: 304, 316L
Skin thickness of hairline finish stainless steel honeycomb panel: 0.7mm to 1mm, or as required.
Honeycomb core is hollow and lightweight. We just need to use thin stainless steel sheets to laminated on it to get stainless steel honeycomb core panel 10mm thick or 25mm thick etc. But the weight is just around 12kgs/m2.
High panel strength and good flatness. If we use solid hairline stainess steel sheets 2mm or 3mm thick, the surface could still be un-flat. Honeycomb core is I-beam structure and it adds much strength to the hairline stainless steel honeycomb panel, the panel surface is smooth and look nice.
Cost saving. We only need to use thin stainless steel sheets like 0.7mm as skins, no need to use 3mm thick. This would save the cost especially like 316L grade stainless steel is expensive.
Hairline stainless steel honeycomb core panel is used for facade elevation decoration.
Brushed stainless steel honeyob panel is used for elevator cabins, escalator side panel cladding etc.
If you need to buy fromChina the Hairline Brushed Finish Stainless Steel Honeycomb Core Panel, please contact us.
Email: lzpanels@163.com or lzpanels01@gmail.com
Whatsapp/Wechat: 0086 13450770492