Fiberglass sandwich panel is composite material made up of a fiberglass layer sandwiched between two thin outer layers. Such fiberglass composite panel is used in a variety of applications, including construction, marine, and transportation, due to their high strength, lightweight, and corrosion resistance.

Wooden Color Wood Grain Aluminum Honeycomb PanelWooden Color Aluminum Honeycomb Panel surface is finished with imitation of real wood grain & pattern. It's actually an aluminium panel, but coated to look like wood.

Mill Finish Aluminum Honeycomb Panels are un-coated (un-painted) aluminum honeycomb sandwich panels. It is same structure like normal aluminum honeycomb panels: two layers of aluminum sheets and an aluminum honeycomb core. The only specialty is the surface of aluminum is mill finish, which is without any paints or coating. The reason of making surface to be mill finish aluminum, is in order to make it possible for stone veneer to glue on. The mill finish aluminum honeycomb panels are used as substrate (backing panels) to make stone honeycomb panels.

Aluminum Honeycomb Core Sandwich Panel is a composite material. Its structure is like a sandwich that has 3 layers. The top layer is aluminum sheet, middle layer is a hexagonal shape lightweight honeycomb core, bottom layer is also aluminium sheet. Composite material generally has a good combination of different properties from it's different components: aluminum sheets has good anti-corrosion property and nice decoration effects but if we use a thick sheet it's quite costy and heavy, aluminum honeycomb core is rigid and lightweight but it's not a good decorative material. That's when we make the aluminum honeycomb sandwich panel: we just need to use two thin aluminum sheets to keep the nice decoration effects, then use a lightweight and low cost aluminum honeycomb to enhance the strength of the thin aluminum skins and to achieve a thicker panel thickness.

Aluminium Aluminum Honeycomb Panel for Door
There are many materials to be used to make doors. Commonly we will see plywood, MDF, HPL and aluminium materials to be used. And aluminium honeycomb panel for door is what we will introduce here. Aluminum door honeycomb panel is a sandwich material, with two thin aluminium sheets laminated to an aluminum honeycomb core.

Aluminium Honeycomb Cladding Panel is consited of two thin aluminium sheets bonded to a lightweight hexagonal aluminium honeycomb core, used for facade cladding purpose. 25mm aluminium honeycomb panel is most commonly used thickness for facade cladding, for its good strength and flatness. And aluminium skin sheets are thin, from 0.7mm, 0.8mm up to 1mm.

4mm 5mm 6mm Aluminum Honeycomb Panel is a special series of thin honeycomb panel. It is same product structure like the thick aluminum honeycomb panel​ that is consisted of two aluminum sheets bonded to an aluminum honeycomb core. But the skin layers of thin panels are generally thinner too.

Aluminium honeycomb panel is a lightweight composite material. It uses two layers of aluminium sheets as face materials, and a hexagonal hollow aluminium honeycomb core to glued together. 50mm aluminium honeycomb panel and 70mm aluminum honeycomb panel are considered as thick panels. Generally we use these thick panels for interior wall partition such as cleanroom, office walls. Or we use them as walls for container house, truck bodies, kiosks walls etc.

Aluminum Honeycomb Roof Panel is a three layer sandwich panel: top layer is a prepainted aluminium sheet, middle layer is lightweight aluminium honeycomb core, bottom layer is a primer coated aluminum sheet. It's available in different thickness, but most commonly used thickness are 10mm, 15mm and 20mm Aluminum Honeycomb Roof Panel.

Fibreglass Foam Sandwich Panel is a composite material. It is consisted of 3 layers: fibreglass sheet on top skin, a foam core, and another fibreglass sheet on bottom. This fibreglass sandwich panel can be cut, drilled as per drawing, so it's suitable to be used for making caravan bodies. Also suitable to use for refrigerated truck bodies.